Pelican Single Lid Cases - AL5430-0418AC

Pelican Single Lid Cases - AL5430-0418AC

Pelican Single Lid Cases: Compact and Robust

Pelican offers lightweight, high-impact polyethylene Single Lid Cases, designed for durability and secure stacking. Their one-piece construction, enhanced with ribbed reinforcements, ensures robust protection.

Key Features:

  • Reinforced Design: Patented metal inserts at key points for strength and load distribution.
  • Secure Locks: Anti-shear locks prevent lid separation and reduce hardware stress.
  • Weather Resistant: Gasketed parting lines for splash resistance and tight seals.
  • Impact Protection: Reinforced edges and recessed hardware offer additional safety.

These cases combine strong materials, a wide temperature range, and various color options, ensuring both protection and customization for diverse needs.

Specs

Interior (LxWxD): 53.9 x 30.1 x 22.6"
Exterior (LxWxD): 57 x 33.2 x 25.8"

Interior Lid Depth: 18.1"
Interior Base Depth: 4.6"
Total Interior Depth: 22.7"

Weight: 73 lbs.

Color Options

Gray 133

Fed Std # 26270

Tan 250

Fed Std # 20372

Blue 135

Pantone # 292U

White 132

Fed Std # 27925

Yellow 136

Pantone # 012U

Green 138

Fed Std # 24052

Orange 134

Fed Std # 12197

Maroon 197

Pantone # 202U

Yellow 131

Fed Std # 23538

Blue 101

Fed Std # 25052

Black 032

Fed Std # 27040

Red 130

Fed Std # 21105

Purple 129

Pantone # 245U

Olive Drab 137

Fed Std # 34096

Details
  • One-piece construction, molded from lightweight, high-impact polyethylene
  • Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
  • Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
  • Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
  • Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
  • Reinforced corners and edges for additional impact protection
  • Recessed hardware for extra protection
Materials
  • Body Material: RotoMolded Polyethylene
  • Latch Material: Steel (Nickel-black Plated)
  • O-Ring Material: Silicone Sponge
  • Foam Material: No Foam, empty case standard. Optional PE and PU, 1 and 2 lb. options filled, lined and custom
  • Purge Body Material: Aluminum
  • PRV Valve Material: .5 PSI Standard, Light Lift .25 PSI
  • Handle Material: Heavy Duty Injection Molded Standard
  • Optional Handle Materials: Stainless Steel Passivated and Stainless Steel Black
  • Hardware Material: Yellow Carbon Steel Standard
  • Optional Hardware Material: Black Carbon Steel, Stainless Steel Passivated and Stainless Steel Black
Accessories
  • Breather Valve Desiccant
  • Card Holder
  • Casters
  • Combination Lock
  • Custom Stenciling
  • Edge Casters
  • Extra Handles
  • FlangeMount
  • Forklift Bash Plates
  • Forklift Provision, Skid Runners
  • Front Labels
  • Grab’N Roll
  • Hinged Lid
  • Humidity Indicator
  • ID Plate
  • Lifting Rings/Tie Down Rings
  • Lockable Cable Catch
  • Lockable Padlock Hasp
  • Manual Purge Valve
  • Stainless Steel Black Passivated Finish Hardware
  • Stainless Steel Hardware
  • Standard Labels
  • Breather Valve Desiccant
  • Card Holder
  • Casters
  • Combination Lock
  • Custom Stenciling
  • Edge Casters
  • Extra Handles
  • FlangeMount
  • Forklift Bash Plates
  • Forklift Provision, Skid Runners
  • Front Labels
  • Grab’N Roll
  • Hinged Lid
  • Humidity Indicator
  • ID Plate
  • Lifting Rings/Tie Down Rings
  • Lockable Cable Catch
  • Lockable Padlock Hasp
  • Manual Purge Valve
  • Stainless Steel Black Passivated Finish Hardware
  • Stainless Steel Hardware
  • Standard Labels
Temperatures
  • Minimum Temperature: -20 degrees F (-29 degrees C)
  • Maximum Temperature: 140 degrees F (60 degrees C)