Pelican Single Lid Cases - BL6752-0805AC/HL
Pelican Single Lid Cases - BL6752-0805AC/HL
Pelican Single Lid Cases: Compact and Robust
Pelican offers lightweight, high-impact polyethylene Single Lid Cases, designed for durability and secure stacking. Their one-piece construction, enhanced with ribbed reinforcements, ensures robust protection.
Key Features:
- Reinforced Design: Patented metal inserts at key points for strength and load distribution.
- Secure Locks: Anti-shear locks prevent lid separation and reduce hardware stress.
- Weather Resistant: Gasketed parting lines for splash resistance and tight seals.
- Impact Protection: Reinforced edges and recessed hardware offer additional safety.
These cases combine strong materials, a wide temperature range, and various color options, ensuring both protection and customization for diverse needs.
Specs
Interior (LxWxD): 67.43 x 51.87 x 13.16"
Exterior (LxWxD): 70.43 x 54.87 x 18.66"
Interior Lid Depth: 5.13"
Interior Base Depth: 8.03"
Total Interior Depth: 13.16"
Weight: 145 lbs.
Color Options
Gray 133
Fed Std # 26270
Tan 250
Fed Std # 20372
Blue 135
Pantone # 292U
White 132
Fed Std # 27925
Yellow 136
Pantone # 012U
Green 138
Fed Std # 24052
Orange 134
Fed Std # 12197
Maroon 197
Pantone # 202U
Yellow 131
Fed Std # 23538
Blue 101
Fed Std # 25052
Black 032
Fed Std # 27040
Red 130
Fed Std # 21105
Purple 129
Pantone # 245U
Olive Drab 137
Fed Std # 34096
Details
- One-piece construction, molded from lightweight, high-impact polyethylene
- Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
- Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container
- Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
- Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
- Reinforced corners and edges for additional impact protection
- Recessed hardware for extra protection
Materials
- Body Material: RotoMolded Polyethylene
- Latch Material: Steel (Nickel-black Plated)
- O-Ring Material: Silicone Sponge
- Foam Material: No Foam, empty case standard. Optional PE and PU, 1 and 2 lb. options filled, lined and custom
- Purge Body Material: Aluminum
- PRV Valve Material: .5 PSI Standard, Light Lift .25 PSI
- Handle Material: Heavy Duty Injection Molded Standard
- Optional Handle Materials: Stainless Steel Passivated and Stainless Steel Black
- Hardware Material: Yellow Carbon Steel Standard
- Optional Hardware Material: Black Carbon Steel, Stainless Steel Passivated and Stainless Steel Black
Accessories
- Breather Valve Desiccant
- Card Holder
- Casters
- Combination Lock
- Custom Stenciling
- Edge Casters
- Extra Handles
- FlangeMount
- Forklift Bash Plates
- Forklift Provision, Skid Runners
- Front Labels
- Grab’N Roll
- Hinged Lid
- Humidity Indicator
- ID Plate
- Lifting Rings/Tie Down Rings
- Lockable Cable Catch
- Lockable Padlock Hasp
- Manual Purge Valve
- Stainless Steel Black Passivated Finish Hardware
- Stainless Steel Hardware
- Standard Labels
- Breather Valve Desiccant
- Card Holder
- Casters
- Combination Lock
- Custom Stenciling
- Edge Casters
- Extra Handles
- FlangeMount
- Forklift Bash Plates
- Forklift Provision, Skid Runners
- Front Labels
- Grab’N Roll
- Hinged Lid
- Humidity Indicator
- ID Plate
- Lifting Rings/Tie Down Rings
- Lockable Cable Catch
- Lockable Padlock Hasp
- Manual Purge Valve
- Stainless Steel Black Passivated Finish Hardware
- Stainless Steel Hardware
- Standard Labels
Temperatures
- Minimum Temperature: -20 degrees F (-29 degrees C)
- Maximum Temperature: 140 degrees F (60 degrees C)